Here is documentation of hop garden building process. I've build it in May 2022. I planted 4 pcs of hops in the last fall - 2x Žatecký...

04.2021 After finishing my powerwall project, i was looking for next big project, that will make my brain and my hands. Few years ago, i...

For homebrewing one need quite a lot of room - just try it in kitchen and you'll see. My goal was to brew mainly lagers, so the next...

I tried method described here https://www.cech-pivo.cz/cs/blog/56-cejchovani-hrnce And it worked - but i was not satisfied with the...

Copper manifold is for lautering. It is alternative to traditional false-bottom used in commercial breweries. In homebrew, people also...

For cooling in my DIY microbrewery, i wanted to have two spirals, one for HERMS circulation, one for wort cooling. Copper is the choice...

I have chosen recipe ALE 11° Lemondrop from "Pivotéky Tábor". My goal is to brew mainly lagers, but it needs to brew something bit easier...

Version 0 for pumping wort / hot water. Printed on 3D printer. With this 12V motor it gets 2,4l/min and with acu-drill it was 3l/min. It...

xx.2019 I needed to have a spot welder, for making packs and building powerwall from 18650 li-ion batteries. It is also useful in other...